Tim's Pro Auto Spa
Paint Protection Film and Tint
Liability Waiver
Upon acceptance of a job you are accepting these terms.
Tim's Pro Auto Spa LLC
Paint Protection Film (PPF) Waiver
About Paint Protection Film
Paint protection film, or PPF as we will refer to it for the
remainder of this waiver, is an 8mm film designed to
protect your vehicle's paint from chips, scratches, and
swirl marks. It is applied to the exterior painted panels of
your vehicle. It is warranted for 10 years from yellowing,
cracking, staining, blistering, and delamination. The
manufacturer’s warranty does not cover accidents, road
debris, or owner damage during wash processes, etc.
Drying Time
Your new PPF will take 3-4 weeks to fully cure, depending
on weather conditions. DO NOT WASH YOUR VEHICLE FOR 5 DAYS!!!
CONDITION OF VEHICLE FOR PPF INSTALLATION
The vehicle can not have any paint protection coatings such as waxes, sealants, or ceramic coatings. These can affect the overall installation, performance, longevity, and appearance of the PPF.
A thorough decon wash is required for these reasons. The client is aware that PPF is for OEM paint systems. The client waives and releases Tim’s Pro Auto Spa LLC from any warranty or damage claims where a film has been installed on non-OEM painted surfaces.
A thorough decon wash is required for these reasons. The client is aware that PPF is for OEM paint systems. The client waives and releases Tim’s Pro Auto Spa LLC from any warranty or damage claims where a film has been installed on non-OEM painted surfaces.
Paint
Paint may lift on repainted or OEM paint if improperly prepped and painted. By authorizing Tim’s Pro Auto Spa LLC to proceed with the installation, the client hereby acknowledges the risk and waives any claims against Tim’s Pro Auto Spa LLC and agrees that Tim’s Pro Auto Spa LLC will not be liable if any damages do occur during the installation process.
Paint Chips
PPF is installed to provide a sacrificial layer to help prevent future paint chips and damage from road debris. PPF over preexisting rock chips will look like contamination or air pockets after the installation, due to the uneven surface of the paint.
Installation
Most of our installs are with pre-cut kits. Pre-cut kits involve stopping short of an edge (typically about a 1/8th of an inch is the desired edge width), edges around badges/emblems, washers, and other parts. The customer understands that PPF is a sacrificial layer for your car, not a completely invisible or matte layer.
The customer may choose to have a custom or bulk installa-tion at an additional fee. These installs are more time-con-suming.
The customer may choose to have a custom or bulk installa-tion at an additional fee. These installs are more time-con-suming.
Exposed Edges and Seams
We strive to wrap all edges, but some edges can not be
wrapped. Debris build-up over time on exposed edges/seams will be more visible on white/lighter colored vehicles. Partial installs will have more noticeable debris due to a larger area of exposed edges. We always recommend doing a complete hood install to avoid partial install edge debris build-up. PPF ceramic coatings are also highly recommended to help reduce debris build-up along other edges and seams. THERE IS NO WARRANTY OR FILM REPLACEMENT
FOR EDGES/SEAMS DEBRIS BUILD UP . Regular and proper maintenance washing will help greatly in
reducing debris build-up.
Headlights
When installing PPF, headlights become a liability due to the HID and exterior coating. Some headlights tend to peel their top coating during the installation of PPF. By authorizing Tim’s Pro Auto Spa LLC to proceed with headlight film installation, the customer acknowledges the risk and waives any claims against Tim’s Pro Auto Spa LLC and agrees that Tim’s Pro Auto Spa LLC will not be held liable.
Film, Badge, and Decal Removal Film, badge, and decal removal may cause the paint, glass, and/or defroster to be damaged. By authorizing Tim’s Pro Auto Spa LLC to proceed with removal, the customer hereby acknowledges the risk, waives any claims against Tim’s Pro Auto Spa LLC, and agrees that Tim’s Pro Auto Spa LLC will not be liable if damage does occur during any removal processes.
Film, Badge, and Decal Removal Film, badge, and decal removal may cause the paint, glass, and/or defroster to be damaged. By authorizing Tim’s Pro Auto Spa LLC to proceed with removal, the customer hereby acknowledges the risk, waives any claims against Tim’s Pro Auto Spa LLC, and agrees that Tim’s Pro Auto Spa LLC will not be liable if damage does occur during any removal processes.
Imperfections
Though we strive for perfection in all our installations, due to
the nature of the product, some degree of dust, contamina-
tion, and/or minor imperfections are present in every PPF in-
stallation. Also, preexisting scratches, rock chips, and flaws
may become more evident after the installation of PPF.
Used/older vehicles will naturally have more imperfections due to their age and degrees of use.
Used/older vehicles will naturally have more imperfections due to their age and degrees of use.
Boats
Manufacturers do not offer warranties for any boat PPF, whether clear or cosmetic. Tim’s Pro Auto Spa LLC will warranty in-house to cover up to $1000 value with any necessary redos at 50% off.
Boat PPF is not warranted due to the common owner error and excessive speed, saltwater, bumping docks, bumping trailers, etc. Once the $1,000 value has been reached, any other portions will need to be paid in full prior to any corrections.
Boat paint can be poorly installed, and therefore, Tim’s Pro Auto Spa LLC can not be held liable for paint chipping or lifting during the PPF/vinyl installation process.
Boat PPF is not warranted due to the common owner error and excessive speed, saltwater, bumping docks, bumping trailers, etc. Once the $1,000 value has been reached, any other portions will need to be paid in full prior to any corrections.
Boat paint can be poorly installed, and therefore, Tim’s Pro Auto Spa LLC can not be held liable for paint chipping or lifting during the PPF/vinyl installation process.
Motorcycles
Motorcycles, especially Harley-Davidsons, are infamous for having thin paint and improper paint techniques utilized. Due to this, motorcycles may have clear coat failure during the installation of any PPF or vinyl. Tim’s Pro Auto Spa LLC can not be held liable for any paint lifting or chipping.
Tim's Pro Auto Spa LLC
Tint Waiver
QUALITY & INSTALLATION CONDITIONS
During any tint installation, especially on older or dirtier vehicles, small amounts of dust, debris, or minor contamination may be visible under the film. These are normal environmental factors and not considered defects. Windows must remain rolled up for 72 hours after installation to allow proper curing.
Any tint darker than 20% on back windows or darker than 35% on front side windows is installed at the owner’s discretion. The owner accepts full responsibility for any legal consequences.
Front windshields may only receive visor tint under Florida law. If the owner requests a full windshield tint, they accept all possible legal ramifications.
Tesla sunroofs are not recommended to be tinted due to potential cracking and warranty issues. The owner accepts all risks and understands Tesla will not honor any warranty related to tinted glass
Any tint darker than 20% on back windows or darker than 35% on front side windows is installed at the owner’s discretion. The owner accepts full responsibility for any legal consequences.
Front windshields may only receive visor tint under Florida law. If the owner requests a full windshield tint, they accept all possible legal ramifications.
Tesla sunroofs are not recommended to be tinted due to potential cracking and warranty issues. The owner accepts all risks and understands Tesla will not honor any warranty related to tinted glass
TINT REMOVAL & DEFROSTER LINES
If tint removal is requested, Tim’s Pro Auto Spa LLC cannot be held liable for any damage to rear window defroster lines that may occur during the process. Our team uses controlled heat, specialized adhesive removers, and gentle scraping tools to reduce risk. However, defroster lines are extremely delicate and may lift or separate due to the age of the vehicle, previous installation methods, or the adhesive bond between film and glass. Once damaged, these lines cannot be repaired and may result in loss of defrost functionality.
CLIENT ACKNOWLEDGEMENT & LIABILITY RELEASE
By authorizing any window tint installation or removal service,
the customer acknowledges:
- They have been informed of the possible appearance of minor imperfections, the curing process, and environmental factors that can affect results.
- They understand that tinting or tint removal carries inherent risks to glass, seals, or defroster lines.
- They accept these risks and agree to release Tim’s Pro Auto Spa LLC from any liability for damages that may occur as a result of these services.
- They have been informed of the possible appearance of minor imperfections, the curing process, and environmental factors that can affect results.
- They understand that tinting or tint removal carries inherent risks to glass, seals, or defroster lines.
- They accept these risks and agree to release Tim’s Pro Auto Spa LLC from any liability for damages that may occur as a result of these services.
RESIDENTIAL & COMMERCIAL WINDOW TINT WAIVER
Small dust, debris, or bubbles may appear under tint due to glass age or environment—these are normal and not defects. Film requires up to 30 days to cure. Do not clean interior windows during this period. Use ammonia-free, soft cloths only.
Thermal stress or seal failure may occur, especially on tempered, double-pane, or Low-E glass. Tim’s Pro Auto Spa LLC cannot be held liable.
The property owner confirms compliance with all HOA and building code tint restrictions. Tim’s Pro Auto Spa LLC is not responsible for permits or replacement due to non-compliance.
Tint installation may void manufacturer warranties on windows. It is the customer’s responsibility to confirm warranty terms with the manufacturer.
Standard labor rates apply for any future tint removal or replacement.
Thermal stress or seal failure may occur, especially on tempered, double-pane, or Low-E glass. Tim’s Pro Auto Spa LLC cannot be held liable.
The property owner confirms compliance with all HOA and building code tint restrictions. Tim’s Pro Auto Spa LLC is not responsible for permits or replacement due to non-compliance.
Tint installation may void manufacturer warranties on windows. It is the customer’s responsibility to confirm warranty terms with the manufacturer.
Standard labor rates apply for any future tint removal or replacement.
Tim’s Pro Auto Spa LLC
Thank you for your understanding.
By accepting an estimate from Tim’s Pro Auto Spa and authorizing services to proceed, the customer acknowledges that they have received, read, and agree to the terms and conditions set forth in this Liability Waiver and any attached Warranties. Acceptance of an estimate shall serve as full agreement to these terms.
- 2840 Co Rd 523 Unit C10, Wildwood, FL 34785
- +1 352 277 4721
- timsdetailing123@gmail.com
If it can’t load, please click here to read the file directly
SERVICES
Professional and Trusted Film Installation in Florida
Discover our services, where you can truly trust and feel completely at ease when choosing to protect and enhance the beauty of your vehicle.
